MINSLITE-W06 6 мм гранулированный озоновый катализатор для очистки сточных вод

Введение продукта

• Ozone catalyst technology is an advanced oxidation process based on ozone. It combines the strong oxidizing properties of ozone with the adsorption and catalytic properties of the catalyst, and be proved more effectively solving the problem of low ozone treatment efficiency, low ozone utilization, high operating costs, and incomplete degradation of organics questions.
• The phase state of the ozone catalytic oxidation catalyst is divided into homogeneous catalytic ozonation and heterogeneous catalytic ozonation. In the homogeneous catalytic ozonation technology, the catalyst is uniformly distributed and has high catalytic activity, the mechanism of action is clear, and it is easy to study and grasp. However, its shortcomings are also obvious. The catalyst is miscible in water, causing it to be easily lost, difficult to recycle, and cause secondary pollution. The operating cost is high and the water treatment cost is increased. The heterogeneous catalytic ozonation method uses a solid catalyst to accelerate the oxidation reaction in the liquid phase (or gas phase) under normal pressure. The catalyst exists in a solid state, is insoluble in water, does not run off, has no secondary pollution, and reduces the operating cost of catalytic oxidation.
• The ozone catalytic oxidation method of wastewater is a large-scale advanced oxidation technology, which is mainly realized through two ways of direct oxidation and catalytic oxidation. Ozone can directly mineralize the large molecules, long chains, and difficult-to-biodegradable organic matter remaining in the wastewater into carbon dioxide and water, and partially decompose into small molecules and easily biodegradable substances, destroy the structure of non-biodegradable organic matter, reduce toxicity, and increase B/ C ratio, so as to ensure the treatment effect of subsequent biochemical methods. The traditional ozone oxidation technology is mainly direct oxidation, which has poor mass transfer effect, low ozone utilization rate, and high investment and operating costs.

Особенности продукта

• Катализатор Minstrong обладает хорошей прочностью., and the average crushing strength is 60-200N/cm;
• Удельная поверхность высокая, with a specific surface area greater than 200m²/г, и внутри катализатора распределено большое количество микропористых структур, который может эффективно поглощать озон и осуществлять каталитическое разложение;
• Катализатор Минстронг устойчив к высоким температурам и не содержит легковоспламеняющихся и летучих компонентов.. При работе с озоном высокой концентрации, нет риска возгорания и вторичного загрязнения;
• Содержание активных ингредиентов высокое., содержание активных ингредиентов катализатора достигает более 85%, производительность стабильна, жизнь длинная, и потерять не так-то просто;
• Сырье и производственный процесс производства катализаторов полностью независимы и контролируемы., и может поставляться стабильно.

Приложения

• Performance Parameters Of Ozone Catalyst For Sewage And Wastewater Treatment