Minslite Series Catalysts for Ozone/CO/VOCs Removal
Product Introduction
- Minstrong hydrogen absorption catalyst can remove hydrogen with high efficiency, and realize tail gas discharge up to standard. The catalyst adopts chemical synthesis method to manufacture active components, and accurately controls each process parameter of synthesis reaction
- The Hydrogen removal catalyst can be used repeatedly after regeneration.
- Below is the reaction equation for catalytic dehydrogenation :
CuO+H2=Cu+H2O
2Cu+O2=2CuO
Product Features
- Minstrong catalyst has good strength, and the average crushing strength is greater than 60N/cm;
- The specific surface area is high, with a specific surface area 160-240m2/g, and a large number of microporous structures are distributed inside the catalyst, which can effectively absorb hydrogen and carry out catalytic decomposition;
- Minstrong catalyst is resistant to high temperature and does not contain flammable and volatile components. There is no risk of combustion and no secondary pollution;
- The content of active ingredients is high, the content of catalyst active ingredients is as high as more than 85%, the performance is stable, the life is long, and it is not easy to lose;
- The specific gravity of the catalyst is low, and the high specific surface area makes the specific gravity of the catalyst only 0.68-1.0 g/cm3, (specific gravity various for differnt type and size) and the weight of the catalyst required to process the same air volume will be reduced by 1/3;
- The raw materials and production process of the catalyst production are completely independent and controllable, and can be supplied stably.
Applications
- Hydrogen removal in vacuum and low pressure systems;
- Hydrogen is removed during deep purification of high-purity gases.
- Other occasions with oxygen to remove hydrogen
WeChat
Scan the QR Code with WeChat