MINSLITE-W09 下水処理用9mmペレット型オゾン触媒

製品紹介

• Ozone catalyst technology is an advanced oxidation process based on ozone. It combines the strong oxidizing properties of ozone with the adsorption and catalytic properties of the catalyst, and be proved more effectively solving the problem of low ozone treatment efficiency, low ozone utilization, high operating costs, and incomplete degradation of organics questions.
• The phase state of the ozone catalytic oxidation catalyst is divided into homogeneous catalytic ozonation and heterogeneous catalytic ozonation. In the homogeneous catalytic ozonation technology, the catalyst is uniformly distributed and has high catalytic activity, the mechanism of action is clear, and it is easy to study and grasp. However, its shortcomings are also obvious. The catalyst is miscible in water, causing it to be easily lost, difficult to recycle, and cause secondary pollution. The operating cost is high and the water treatment cost is increased. The heterogeneous catalytic ozonation method uses a solid catalyst to accelerate the oxidation reaction in the liquid phase (or gas phase) under normal pressure. The catalyst exists in a solid state, is insoluble in water, does not run off, has no secondary pollution, and reduces the operating cost of catalytic oxidation.
• The ozone catalytic oxidation method of wastewater is a large-scale advanced oxidation technology, which is mainly realized through two ways of direct oxidation and catalytic oxidation. Ozone can directly mineralize the large molecules, long chains, and difficult-to-biodegradable organic matter remaining in the wastewater into carbon dioxide and water, and partially decompose into small molecules and easily biodegradable substances, destroy the structure of non-biodegradable organic matter, reduce toxicity, and increase B/ C ratio, so as to ensure the treatment effect of subsequent biochemical methods. The traditional ozone oxidation technology is mainly direct oxidation, which has poor mass transfer effect, low ozone utilization rate, and high investment and operating costs.

製品の特徴

• ミンストロング触媒は優れた強度を持っています, and the average crushing strength is 60-200N/cm;
• 比表面積が大きい, with a specific surface area greater than 200m²/g, 触媒内部には多数の微細孔構造が分布している, オゾンを効果的に吸収し、触媒分解を行うことができます。;
• Minstrong 触媒は高温に耐性があり、可燃性および揮発性の成分を含みません。. 高濃度オゾンを扱う場合, 燃焼の危険がなく、二次汚染もありません。;
• 有効成分の含有量が高い, 触媒活性成分の含有量が最大以上に高い 85%, パフォーマンスは安定しています, 人生は長い, そして失うのは簡単ではありません;
• 触媒製造の原料と製造プロセスは完全に独立しており、制御可能です。, 安定して供給できる.

アプリケーション

• Performance Parameters Of Ozone Catalyst For Sewage And Wastewater Treatment