MINSLITE-W09 9mm Katalis Ozon Tipe Pelet Untuk Pengolahan Limbah

Pengenalan Produk

• Ozone catalyst technology is an advanced oxidation process based on ozone. It combines the strong oxidizing properties of ozone with the adsorption and catalytic properties of the catalyst, and be proved more effectively solving the problem of low ozone treatment efficiency, low ozone utilization, high operating costs, and incomplete degradation of organics questions.
• The phase state of the ozone catalytic oxidation catalyst is divided into homogeneous catalytic ozonation and heterogeneous catalytic ozonation. In the homogeneous catalytic ozonation technology, the catalyst is uniformly distributed and has high catalytic activity, the mechanism of action is clear, and it is easy to study and grasp. However, its shortcomings are also obvious. The catalyst is miscible in water, causing it to be easily lost, difficult to recycle, and cause secondary pollution. The operating cost is high and the water treatment cost is increased. The heterogeneous catalytic ozonation method uses a solid catalyst to accelerate the oxidation reaction in the liquid phase (or gas phase) under normal pressure. The catalyst exists in a solid state, is insoluble in water, does not run off, has no secondary pollution, and reduces the operating cost of catalytic oxidation.
• The ozone catalytic oxidation method of wastewater is a large-scale advanced oxidation technology, which is mainly realized through two ways of direct oxidation and catalytic oxidation. Ozone can directly mineralize the large molecules, long chains, and difficult-to-biodegradable organic matter remaining in the wastewater into carbon dioxide and water, and partially decompose into small molecules and easily biodegradable substances, destroy the structure of non-biodegradable organic matter, reduce toxicity, and increase B/ C ratio, so as to ensure the treatment effect of subsequent biochemical methods. The traditional ozone oxidation technology is mainly direct oxidation, which has poor mass transfer effect, low ozone utilization rate, and high investment and operating costs.

Fitur Produk

• Katalis minstrong mempunyai kekuatan yang baik, and the average crushing strength is 60-200N/cm;
• Luas permukaan spesifiknya tinggi, with a specific surface area greater than 200m²/G, dan sejumlah besar struktur mikropori didistribusikan di dalam katalis, which can effectively absorb ozone and carry out catalytic decomposition;
• Katalis Minstrong tahan terhadap suhu tinggi dan tidak mengandung komponen yang mudah terbakar dan mudah menguap. When dealing with high-concentration ozone, there is no risk of combustion and no secondary pollution;
• Kandungan bahan aktifnya tinggi, kandungan bahan aktif katalis lebih dari 85%, kinerjanya stabil, umurnya panjang, dan tidak mudah untuk kalah;
• Bahan mentah dan proses produksi produksi katalis sepenuhnya mandiri dan terkendali, dan dapat disuplai secara stabil.

Aplikasi

• Performance Parameters Of Ozone Catalyst For Sewage And Wastewater Treatment